Rendering Beef Tallow

Tallow is an ingredient that is commonly used in soap making and if you are buying commercially made soap, tallow is likely an ingredient. You won’t see tallow listed as such on the package. As an ingredient it will be listed as sodium tallowate, which is the name for soap that has been made by combining tallow with sodium hydroxide (lye).  This Wikipedia article explains other uses for tallow.  https://en.wikipedia.org/wiki/Tallow#Food

Unlike coconut oil, olive oil, lard and some of the other oils used in soap making, tallow is not readily available in most grocery stores. When I first began making soap I used oils that were readily available and while I could have ordered tallow online or perhaps sought it out at a butcher shop, I never did. It wasn’t until we started buying our beef from a local farmer that I began using tallow as an ingredient in some of my soap.

We had ordered a quarter of a cow. When I called the processing facility to tell them how I wanted our beef cut up, I asked if I could get some tallow as well. At that point I had not done all of my homework, I didn’t know that the fat that I wanted was called suet before it was rendered, so the lady did correct me. I did know that I would have to render the fat before it would be suitable for soap making.

When we picked up our meat order I found that the suet was a large chunk of fat wrapped in a large plastic bag. I put it in the freezer until I was ready to use it.

IMG_3390
Suet

 

I had read several tutorials and I realized that in rendering the suet into tallow the objective was to melt the fat in order to separate out any parts that were not pure fat.

I’ll share with you the method that I used and have continued to use ever since.

I started by taking the suet out of the freezer and letting it thaw for a while. It seems that it is easiest to cut while it is still cold but not frozen. I cut it into fairly small pieces. The smaller they are the faster they will melt or the less cooking time it will take. I put the suet pieces in my large stock pot and added enough water to cover it. I put it on the stove and brought it to a boil. Since I did not want the water to cook off I put a cover on it but I tilted the cover so that some of the steam could escape.

IMG_3391
Rendering Tallow

It took a few hours of boiling before most of the fat chunks were completely melted. At this point I dipped in with a sieve and took out some pieces of meat that would obviously not melt.

I then let it cool. Since outside temperatures were in the 40’s (Fahrenheit) and lower, I decided to let it cool outside overnight. The next day the tallow had hardened and floated to the top. The water and some remaining meat particles were in the bottom of the pan. I had to break through the layer of tallow to drain the water off. I did this outside because I didn’t want any tallow particles clogging up my drain.

When I removed the tallow from the pan the bottom was covered in a layer of mushy grey stuff. I scraped off this layer and discarded it. My tallow was not yet as clean as I wanted it so I put it back in the pan, covered it with water and repeated the process.

The tallow did not take nearly as long to melt as the suet did so my cooking time was greatly reduced. After letting the second rendering cool and harden, I again scraped the mushy stuff off the bottom and decided to repeat the process once again.

After the third rendering the tallow looked clean and pure. I placed it on a tray lined with paper towel to dry and patted the top and sides dry with paper towel as well.

IMG_3406
Tallow

I then cut it into chunks, but because it is very hard it cracks rather than cuts, and placed the chunks in a freezer bag. I then store the tallow in the freezer until I am ready to use it.

Tallow is not an essential oil for soap making, and I realize there are individuals who prefer not to use animal fats in their soaps, but tallow does make a hard bar of soap and adds a creaminess to the lather. For me the greatest advantage of tallow is that it can be locally sourced, unlike coconut oil, olive oil and many others that must travel hundreds, if not thousands, of miles to arrive at my home and be turned into soap.

🙂 Until next time…

1 thought on “Rendering Beef Tallow

  1. We have a butcher in town that renders beef fat for me. I never knew exactly what he was doing until you explained the process. I think I should pay him more for the amount of work that goes into it! I usually just barter for things I need for my soap and lotion making…now I am pretty sure that sweet man will be receiving some money as well!

    Liked by 1 person

I would love to hear from you.

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s